Zeagle Octo-Z Owner's Manual download pdf (Page 15)

It is essential that your Octo-Z is checked at least annually by an

authorized Zeagle regulator technician. Unusually heavy use, or use

in dirty or contaminated water may result in the need for more frequent

service. A service record has been provided at the end of this manual

to assist you in keeping your regulator’s service up to date.

MAINTENANCE

Failure to rinse sterilizing chemicals out of the regulator will cause

serious damage to plastic parts of the regulator. This will result in

cracking of hard plastic parts and shrinking or swelling of soft plastic

parts. NOTE: DO NOT USE SOLVENT CHEMICALS TO CLEAN THE

REGULATOR

Store the clean dry regulator in a clean bag or storage box, away from

(OPV) and flow through the inner bladder flushing out salt and miner-

als. Pull both OPV strings occasionally. When the BC is flushed out,

turn the water off and disconnect the garden hose from the coupling.

Excess water can be drained out of the corrugated hose or from the Over

Pressure Valves by pulling the release strings. DO NOT OVER TIGHTEN

THE COUPLING. It is not designed to seal completely against a garden

hose. A LITTLE LEAKAGE IS OK.

The coupling on the corru-

gated hose is designed to

connect to the typical gar-

den hose. After your dive,

LOOSELY attach the connec

tion to a garden hose (Fig.

5) and turn the fresh water

valve on to a slow controlled

flow. The water will flow into

the bladder of your BC and

when the bladder is full, the

excess water will push open

the Over Pressure Valve

Fig. 5

1 2 ... 10 11 12 13 14 15 16 17 18 19

No comments

Zeagle Octo-Z Owner's Manual Page 15